Cork flooring is divided into two categories according to the paving method:
The first category: suspended cork flooring
The second category: adhesive cork flooring
Cork flooring is divided into six categories according to product structure as follows:
The first category: the surface of the cork floor without any cover, this product is the earliest.
The second category: coating on the surface of cork flooring. That is, the surface of the cemented cork is coated with UV varnish or paint or photosensitive varnish PVA. According to the different types of paint, it can be divided into three types, namely, high light, matt and flat light. This is the technology of the 1990s. These products require a relatively high surface for the cork flooring, that is, the softwood used is relatively pure. PU products are used. PU paint is relatively soft and can penetrate into the floor. It is not easy to crack and deform.
The third category: PVC veneer, that is, the surface of the cork floor covered with PVC veneer, the structure is usually four layers: the surface layer is PVC veneer, the thickness is 0.45mm; the second layer is the natural cork decoration layer, the thickness is 0.8mm The third layer is a cemented cork layer with a thickness of 1.8mm; the bottom layer is a stress balance and waterproof PVC layer. This layer is very important. Without this layer, when the material is thermoset, the PVC surface layer shrinks and shrinks. Warps the entire floor. This type of flooring is currently favored by consumers in Beijing and Shanghai.
The fourth category; PVC veneer, thickness 0.45mm; the second layer is natural thin wood, the thickness is 0.45mm; the third layer is cemented cork, the thickness is about 2mm; the bottom layer is the same as the third type of PVC board The water resistance is good, and at the same time, the stress of the plate surface is balanced, and the thickness thereof is about 0.2 mm.
The fifth category: plastic cork flooring, resin bonded cork flooring, rubber cork flooring.
The sixth category: multi-layer composite cork flooring, the first layer is the lacquer wear layer, the second layer is the cork solid wood layer, the third layer is the solid wood multi-layer board or HDF high-density board layer, and the fourth layer is the cork balance mute. Floor. Cork flooring is very suitable for general home decoration, conference rooms, libraries, etc. The reason why it can be applied to so many living decoration is because it is quiet, soft, wearable, comfortable and so on. Bedrooms, conference rooms, libraries, recording studios, etc.
